Soaring Instruments - Behind Panel Installation

Parts

(1) Rear Mount Plate
(4) Standoffs
(8) M4 Screws
(8) M4 Washers

1. Prepare Panel

a. Use the rear mount plate as template. Tape template securely as shown (1a). (There are 14 breakaway tabs around the edge of this plate. Only 2 on the top half and two on the bottom half that suit the layout of your panel are necessary for secure attachment of assembly.) Unused tabs can be removed.

b. Mark the window cut-out corners using the 4 holes labeled A. Mark the top 2 and bottom 2 panel mount locations holes you plan to use.

c. Remove template and connect the 4 dots (A) (window cutout).

d. Cut window out and drill panel mount holes (5/32”).

1. Prepare Rear Mount Plate

a. Attach 4 standoffs using 4 screws and 4 washers as sown.

b. Place ClearNav in mount as shown.

c. View from behind.

d. Attach back plastic plate and standoffs. These items were supplied with the ClearNav.

3. Mounting Assembly

a. Mount assembly to Panel using 4 screws and 4 washers.