4000nv, Wind, It will not log in any speed
Moderator: Kestrel
2 posts
• Page 1 of 1
4000nv, Wind, It will not log in any speed
by crazywolf223 on May 29th, 2010, 4:05 pm
It log in all other data but not wind?
- crazywolf223
- Posts: 2
- Joined: January 16th, 2010, 6:43 pm
Re: 4000nv, Wind, It will not log in any speed
by Nielsen-Kellerman on June 8th, 2010, 4:47 pm
Hi Crazywolf223,
Have you tried performing a hard reset? This can be done by removing the batteries and holding the power button for approximately 30 seconds. This discharges the capacitors on the circuit board which may be holding a residual charge (thus, not allowing the Kestrel to function properly).
Please let us know if this works!
Have you tried performing a hard reset? This can be done by removing the batteries and holding the power button for approximately 30 seconds. This discharges the capacitors on the circuit board which may be holding a residual charge (thus, not allowing the Kestrel to function properly).
Please let us know if this works!
-
Nielsen-Kellerman - Site Admin
- Posts: 55
- Joined: January 4th, 2006, 2:58 am
- Location: Boothwyn, Pennsylvania
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest